Viavi T-BERD 6000A V2, User Manual

Page: 109 / 188

Chapter 10 File management
Storage media
User Manual 76100000200 Rev. 001 89
The 6000A V2 Platform can also be delivered with a hard disk, available
on option, which maximum capacity is of 100GB. It must be used with
Transport applications.
External USB
storage media
The 6000A V2 Platform is equipped with 2 USB ports as standard. One
of these can be used to connect an external storage medium, in partic-
ular a USB memory stick.
USB memory stick
connection
1 Insert the USB memory stick in one of the 6000A V2 Platform's USB
port.
A sound is emitted to confirm the successful insertion and recogni-
tion of a USB memory stick.
Then, the icon
is displayed in the upper banner to inform the
user the USB stick is ready to be used.
USB memory stick
disconnection
1 Before disconnecting the USB memory stick, always select a
storage device different from usbflash (select disk for example) in
the explorer.
2 Make sure you no longer have any running applications using the
usbflash storage media.
3 Press the Eject USB key, available in File Explorer .
The icon becomes to indicate it can be removed safely. In this
state, the USB stick cannot be used anymore
The USB memory stick can then be disconnected from the USB port.
See Chapter 16 “Maintenance and Troubleshooting” page 137 if any
problem occurs with the USB memory stick
NOTE
Although three USB ports are present, it is not possible to use simul-
taneously more than one external USB storage medium.
When a file is moved in the explorer of the Platform, the end of
the move on the screen does not mean that writing of data into
the memory is complete. Some data may still be in a writing
process if the storage unit is removed prematurely.
NOTE
The USB memory stick can also be removed using the Expert Tools
> Media Utilities menu, accessible via the Home page.