Viavi T-BERD 5800, User Manual

Page: 34 / 100

Chapter 2 Getting Started
Navigating the TEM Module user interface
T-BERD/MTS 5800 Timing Expansion Module User Manual
Page 18 22112315, Rev. 004 July 2017
Figure 5 illustrates the buttons with the oscillator turned on and warming up.
Result Buttons
Group and Category buttons are provided at the top of each result window. The Group
button on the left allows you to select the type of results you want to observe (for
example, Summary results); the Category button on the right allows you to select a
specific results category for the group you specified.
By selecting a different group or category for each pane, you can view multiple sets of
results at the same time.
Figure 6 illustrates two results panes with the Satellites group
and Sky Plot category selected in the left pane, and the Summary group, Status cate-
gory selected in the right pane.
Timing information (results) supporting the TEM Module are documented in of this
manual; test result descriptions are documented in the Test Results chapter of the
Testing Manual that supports your instrument and application (for example, the
Ethernet Testing Manual or SONET Testing Manual ).
NOTE:
The color of a button reflects its current state. Action buttons are highlighted in
yellow when they are turned on; they are grey when they are off.
Figure 6 Result Buttons (GNSS Synchronization Source)