OLP
-
35V2/
-
35SC/
-
38V2
21
S
ELECTING
E
XPERT
/O
PTI
C
HEK
MODE
4 O
PERATION
Selecting Expert/OptiChek mode
The OLP-3xV2 provides two operating modes:
To select an operating mode:
J
Tap [MODE] to toggle between Expert and OptiChek mode.
Selecting a display mode
The OLP-3xV2 provides following display modes:
• dBm/Watt: Display of absolute power level
• Loss: Display of power level relative to a reference value
• PF Abs: Pass/Fail indication based on an absolute power
threshold
• PF Loss: Pass/Fail indication based on a relative power
threshold
To select a display mode:
J
Press [
] to toggle between the displays modes.
Expert
All functions are available, like
selecting a wavelength and loss
measurement. Use this mode for in
depth evaluation of your test
environment. All following described
functions are available in Expert mode
only.
OptiChek
This mode is meant for quick and easy
test procedures. Only the absolute
power level can be measured and you
can not select a wavelength (range
from 1300 to 1600 nm is used).
