VIAVI Solutions
Contact Us +1 844 GO VIAVI
(+1 844 468 4284)
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
© 2018 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
Figure 4: OLP-87, Front View
Figure 5: OLP-87, Top View
Connect to Fiber Under Test (FUT) and measure power levels:
All fibers and connectors should be cleaned and inspected prior to connection, as described on page 1.
The OLP-87 should be connected between the OLT and ONT at the ONT as follows:
1.
Connect an APC patch cord between the OLP-87 OLT connector
and the OLT.
2.
Connect an APC patch cord between the OLP-87 ONT
connector and the ONT.
3.
Tap the
Home button
to display the
Home Screen
.
4.
Tap the
PON Meter
icon.
5.
Tap the
Menu
button and set
Location
to
Anywhere
6.
Read the Power Measurements:
•
1310nm is the Upstream power from the ONT
•
1490nm is the Downstream power from the OLT
•
1550nm is the Video RF power from the OLT.
Figure 6: Through Mode testing
