Viavi SmartClass MPOLP-85, Operating Manual

Page: 95 / 115

MPOLx-84/85 (P) 95
11 D
ATA
M
ANAGEMENT
D
ATA MANAGEMENT OF
P
ROBE AND
PCM
TESTS
Managing test results
To select/deselect a test result:
There are several ways to select and deselect test results:
1. Tap an entry once to highlight it, tap it again to select it.
2. Use the up/down arrows to highlight an entry and press the
center key to select it.
3. Press the
[
A
]
key and tap the [ Select All ] button to select all.
4. Press the
[
A
]
key and tap the [ Deselect All ] button to deselect
all.
NOTE: The selection state of the highlighted entry toggles. The check
mark in the first column shows in light grey when an entry is
deselected and in dark grey when it is selected.
To view test results in full screen:
I
The measurement data overview is displayed.
1. Select one or more test results from the list.
2. Press the
[
A
]
key and tap the [ View Selected ] button.
The first selected result will be displayed.
3. Press the
[
A
]
key and tap the [ Next ] or [ Previous ] button to
display other results.
To sort the test results:
I
The measurement data overview is displayed.
1. Press the
[
A
]
key.
2. Tap the [ More ] button, then tap the [ Sort Order ] button.
3. Select the desired sorting order.
To show or hide the overview columns:
I
The measurement data overview is displayed.
1. Press the
[
A
]
key.
2. Tap the [ More ] button, then tap the [ Show Columns ] buttons.
3. Tap any column header to toggle its hide/show status.
To delete stored results from a project:
I
The measurement data overview is displayed.
1. Select one or more test results.
2. Press the
[
A
]
key.
3. Tap the [ Delete Selected ] button.
The selected test results are deleted.