Viavi ONX-220, User Manual

Page: 131 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 131
Chapter 9 Configuring the OneExpert with StrataSync
Measurement Settings Deployment
Only one set of measurement settings can be deployed at a time to any meter.
Measurement settings can be deployed to one, many or all units available to the StrataSync
server.
1. From the Measurement Settings screen, check the box in
front of the Measurement Settings in the list you would
like to deploy.
2. Right-click the Actions button above the upper left side of
the list screen.
3. Select Deploy from the list. The meter selection list
appears.
4. Select the meter(s) to which you would like to deploy the
plan.
y
Click the box in front of each meter to receive the
deployment
y
To deploy to all meters in the list, select the checkbox in the header of the
first column.
5. After all desired meters have been checked, select the Next button. A message will
appear confirming the deployment.