Viavi OLS-34 Operating Manual Download Page 10

Page: 10 / 38

OLS-34/-35/-36/-37/-38

2 S

AFETY

NFORMATION

ASER

SAFETY

Laser safety

Battery operation

WARNING

Dangerous laser radiation

Laser radiation can cause irreparable damage to the eyes

and skin.

This device is a Class 1 laser product according to DIN EN

60825-1:2003 and EN 60825-1:2007.

Observe the following instructions when working with this

device and laser systems in general:

►

Connect all optical fibers before switching on the radiation

source.

►

Switch off the laser source before disconnecting the optical

fibers.

►

Never look directly into the output of a laser source or into

an optical fiber connected to it.

►

Always cover unused ports.

►

Observe the normal precautions for working with laser

radiation and follow any local regulations.

WARNING

Explosion danger

Short-circuiting the batteries can result in overheating,

explosion or ignition of the batteries and their surround-

ings.

►

Never short-circuit the battery contacts by touching both

contacts simultaneously with an electrically conductive

object.

►

Only use AA size dry batteries or rechargeable batteries.

►

Take care to insert the batteries correctly.

OLS-34_35_36_37_38_en.book Seite 10 Montag, 14. Mai 2018 5:22 17

Summary of Contents for OLS-34







































Search results

Summary of Contents for OLS-34

Reviews:

Related manuals for OLS-34

Brands by name

Popular brands

Viavi OLS-34, Operating Manual

Search results

Summary of Contents for OLS-34

Reviews:

Related manuals for OLS-34

Brands by name

Popular brands