Viavi MTS 4000 Base Unit, User Manual

Page: 162 / 254

Chapter 9 Ethernet TE Testing
Ethernet TE results
140 User Manual 77000000206 Rev. 007
You can view many additional results by pressing the arrow keys or use
the
View soft key and then select another category.
The following sections describe the results in each category.
Ethernet
Summary
results
This default results screen provides a summary of the most frequently
used test results.
Table 5 describes the Ethernet summary results.
Fig. 90 Summary page
Table 5 Ethernet summary results
Result Definition
Circuit diagram Located in the top area of the screen, shows a
graphic indication of the circuit, including the
link status (“Link Up/Link Down”).
Link status Located on the left of the screen, indicates
whether the link is up or down.
Duplex Indicates the media type: half duplex or full
duplex.
Speed Indicates the media speed: 10Mbps, 100Mbps,
or 1000Mbps.
Bytes Total bytes received and transmitted.
Frames Total frames received and transmitted.
Errors Total errors received and transmitted.