8
QUICK START GUIDE
Operation
CHAPTER 3
1.
From the
Live Inspection View
, press and hold the Autofocus/Inspection
Trigger. This will focus the fiber automatically, then perform PASS/FAIL
analysis.
(To focus the fiber manually instead, adjust the Manual Focus/
Navigation Control until the Focus Quality Meter turns yellow or green. Then,
press the Action Button to perform PASS/FAIL analysis.)
2.
FiberChek will briefly display the analysis result, then enter the
Analysis
Result View
. A green screen with a "check" graphic indicates a PASS result. A
red screen wtih an "X" graphic indicates a FAIL result. To perform additional
actions from the
Analysis Result View:
•
Tap the Touchscreen Display to display or hide additional information.
The modes are
No Overlay, Rings,
and
Rings + Table.
•
Press the Magnification/Return Button to toggle between
High
Magnification
and
Low Magnification
of the fiber.
•
Press the Action Button to save the current analysis to FiberChek's
storage or current group.
(See "Working with Groups.")
•
Press the Autofocus/Inspection Trigger to return to the
Live Inspection
View.
Performing PASS/
FAIL Analysis:
Working with Groups
You may find it useful to collect several analysis results or still images into a group.
Saving completed PASS/FAIL analyses into a group makes it easy to keep track of
analyses from the same job. To begin adding analyses or images to a group:
1.
From the
Live Inspection View
, tap the Touchscreen Display to enter the
Menu.
2.
Select CREATE NEW GROUP using the Manual Focus/Navigation Control, then
press the Action Button.
3.
Return to the
Live Inspection View
by pressing the Autofocus/Inspection
Trigger once, or by pressing the Magnification/Return Button twice. You
may begin perfoming PASS/FAIL analysis as usual.
(See "Performing PASS/FAIL
Analysis.")
Saving an analysis result will add it to the current group.
Creating a New
Group:
