AVX-10K Operation
Rev. 002
2022-08-25
22135254
VIAVI
Page
49
of
139
3.1.3.
Direct to UUT
On occasion, the AVX-10K may need to be directly connected to the UUT bypassing the antenna and
cabling. When using this setup, only the cable loss will factor into the setup parameters.
3.2. Common Setup Parameters
There are settings that are duplicated across many applications within the AVX-10K. This section will
detail those common settings of applicable test applications from the SETUP tab. These include:
•
“RF Port” (Antenna, Direct Connect, Direct Connect with Coupler)
•
“Antenna Settings” (Range, Height, Gain [1.03 GHz, 1.09 GHz])
•
“Cable Settings” (Cable Length, Cable Loss)
•
“Coupler Settings”
•
“UUT Address”
•
“Position Settings” (Entry Method, Latitude, Longitude, Format)
•
“Advanced Settings” (Check All UUT Capability, Verify Unit Setup Configuration)
Summary of Contents for AVX-10K
