Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download

Page: 65 / 380

G3-GS-4P-32T

Chapter 1: Appliance installation 65

G3-GS-4P-32T installation

Getting your appliance installed is the first step to greater visibility of your

network. This topic covers installing your appliance in the cabinet and connecting

it to your network.

Caution:

Do not attempt in-cabinet repairs of your appliance. The

appliance is very heavy! Always use a server lift or work with a partner

to install or remove the appliance from the cabinet to perform any

maintenance.

Take the appliance and all other components out of the packing materials.

Attach the

official rail kits (page 73)

to your server rack or cabinet.

Install the unit into your server rack or cabinet. Use a server lift if necessary.

Do not remove the RAID drives from the chassis.

Using an Ethernet cable, connect the

ETH0

port to the network.

Connecting the ETH0 port allows you to use Windows Remote Desktop or

other tools to control or configure Windows or Windows applications, such as

Observer.

(Optional) Connect an Ethernet cable from your router or switch to the LOM

or IPMI port.
(Optional) A Lights Out Management or IPMI port provides you a dedicated

management channel for device maintenance. It allows you to monitor,

start, stop, and manage your appliance remotely regardless of whether the

appliance is powered on.

Install

SFP transceivers (page 179)

into the open slots on the back of the

capture card(s).

If you are connecting to SPAN/mirror ports of a network switch

: connect a

straight-through Ethernet cable from the SPAN/mirror ports on your switch to

the SFP transceivers on the capture card.

If you are connecting to a network TAP (sold separately):

11.

SFP, SFP+, and QSFP+ transceivers are sold separately.

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands