ALT-9000 Getting Started Manual
Page 19
7.1.B
Data Slew Bar
For some data-entry fields, a data slew bar is available.
When displayed, the operator can use the Data Slew Bar to
incrementally adjust data values by sliding the bar.
Selecting x10 increases the step increment by a factor of 10.
Selecting /10 decr eases the step increment by a factor of
10. Selecting Enter closes the Data Slew Bar.
Fig. 9 Data Slew Bar
7.1.C
Rotary Knob
The Rotary Knob is used to slew values up or down.
Selecting x10 will increase the step increment by a factor
of 10. Selecting /10 will decrease the step increment by a
factor of 10. Selecting Enter closes the Rotary Knob.
Fig. 10 Rotary Knob
To use the ‘up’ and ‘down’ buttons on the Slew
Bar, buttons must be pressed and held for a
few seconds.
