4
AA-400 rev.02
1.
INSTALLATION
1.1
Precautions
Read the following instructions com-
pletely before connecting or operat-
ing the unit. Failure to comply with
the instructions in this booklet may
result in a malfunction or injury.
The room temperature where the alarm system
is located
must always remain between 0°C to
40°C (32°F and 104°F).
To avoid exposing the controller to harmful
gases or excessive humidity, it is preferable to
install it in a corridor.
Do not spray water on
the controller!
For Customer Use
Enter below the serial number located on the
side of the controller and retain this informa-
tion for future reference.
Model number: AA-400
Serial number:
Date installed:
1.2
Installation Procedure
What you need:
-
AA-400 system including an
independent battery enclosure:
-
12VDC / 7.5AH sealed lead acid
battery;
-
16.5VAC/40VA transformer.
To avoid electrical shocks and
equipment damage, turn off the
breaker on which is connected the
unit before configuring the main
board or making connections to the
terminals.
•
Step 1:
Determine where you want to
install the system. You need an unswitched
AC power outlet nearby to operate the
system.
•
Step 2:
Make a list of all the sensor inputs
you will be using with the AA-400 alarm
system.
•
Step 3:
Mount the AA-400 alarm system
and the battery enclosure on the wall (see
section 1.3).
•
Step 4:
Connect a ground wire to the main
ground of the system (see section 1.4.3).
•
Step 5:
Hook up the battery and plug the
transformer into an AC power outlet (see
section 1.4.2).
Summary of Contents for Agri Alert 400
Page 1: ...Alarm System User s Manual ...
Page 15: ...15 AA 400 rev 02 ...
Page 16: ...M 890 00458 rev 02 REV 02 ...
