1
3.9 Measurement without App
After you have learned how to use the App for
measurement. You can also perform measurement
without connecting to the app when you do not
need to store data.
1.
Refer to section 3.3 and 3.4 to wear the cuff.
2.
Inflate the cuff by squeezing the pump at the
similar rate you have learned in the App.
3.
Stop pumping
when the monitor beep twice,
hold the pump without squeezing it, and wait
for the further instructions. In some cases, if
the monitor senses that the pressure in the cuff
is not high enough for use, then the user will
be instructed to "
Pump
" again.
4.
After the test.
The blood pressure readings
will appear on the screen of the monitor when
the test has finished. You need to manually
press the exhaust valve to
deflate the cuff
.
Note:
If you want to start a new measurement, you can
short press the power button of the monitor. Or pump
When the monitor is not connected to App for
measurement, the results will not be saved.
3.10 Trouble Shooting
Problem
Possible Cause
Recommended
Action
