15
should be selected when use of SpO
2
simulator, e.g.
for Index 2 series SpO
2
simulator from Fluke
Biomedical Corpora9on, please set "Make" to
"DownLoadMake: KRK", then the user can use this
par9cular R-curve to test the Oximeter. If the SpO
2
simulator does not contain "KRK" R-curve, please
ask the manufacturer for helping to download the
given R-curve into the SpO
2
simulator.
High-pressure steriliza/on cannot be used on the
device.
Do not immerse the device in liquid.
It is recommended that the device should be kept in
a dry environment. Humidity may reduce the life
of the device, or even damage it.
6.2 Cleaning and Disinfec/ng Instruc/on
•
Surface-clean sensor with a sok cloth damped with
a solu9on such as 75% isopropyl alcohol, if low-
level disinfec9on is required, use a mild bleach
solu9on.
•
Then surface-clean with a cloth damped ONLY with
clean water and dry with a clean, sok cloth.
Cau/on:
Do not sterilize by irradia9on steam, or ethylene oxide.
Do not use the Oximeter if it is damaged.
