Viatek LL03-RGTIPS Instructions Manual Download Page 2

IMPORTANT SAFEGUARDS

To reduce the risk of fire, electric shock, or injury when using any electric 

appliance, precautions should be made. These precautions include but are not 

limited to:
Read all instructions.
CAUTION! — Use only as directed. Improper use may result in damage to the 

eyes due to direct exposure to laser radiation. 
This product has a polarized plug to reduce the risk of electric shock. It will 

therefore only fit into a polarized outlet one way. If the plug does not fit, reverse 

the plug. If it still does not fit, contact a qualified electrician. Do not use with an 

extension cord unless the plug can be fully inserted. Do not alter the plug. 
This unit is certified as a Class IIIa laser product by the US Federal Laser 

Product Performance Standard (FLPPS) according to regulations in 21 CFR 

Subchapter J. Class IIIa laser products can be hazardous when directly viewed. 
Avoid looking directly into Class IIIa lasers. This product, as well as other 

demonstration laser products like some laser pointers, are classified as Class 

IIIa laser energy levels. This product uses diffractive optics to scatter the beam 

of energy. This scattering effect causes the energy concentration to drop 

below the exposure limits for momentary or accidental viewing at a relatively 

short distance for the laser aperture. As with all bright light sources, when you 

operate this device in public areas it is recommended that up-close access to 

the light be restricted. 
While the Class IIIa laser in this device may be hazardous on its own, it is 

encased in a protective housing and uses diffractive holographic optics, 

therefore the laser radiation is not directly exposed to during operation or 

maintenance. Each individual laser beam is less than 5mW, which is about the 

same as an average laser pointer. 
DO NOT attempt to open the protective housing or operate the device if 

the aperture windows are damaged. If the unit requires service that involves 

removing the protective housing, contact the manufacturer. Opening the 

protective housing voids the warranty. 
Use only three-wire outdoor extension cords that have three-prong grounding 

plugs, plugged into grounded outlets. Acceptable extension cord types:
 

 SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, 

SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, SJTOW, SJTOW-A

Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the 

circuit(s) or outlet(s) to be used while operating portable laser light in a wet 

location. Receptacles with built-in GFCI protection are available for this 

purpose.
SAVE THESE INSTRUCTIONS

Summary of Contents for LL03-RGTIPS









Reviews: