Viatek CWC-302, Manual, Page: 5 / 8

ATTACHING CLEANING PAD
Align cleaning pad with hook and loop fastener on
squeegee head and press down to attach. Pull up
on pad from a corner to remove or reposition. Clean
pad after each use for best results. See CARE
INSTRUCTIONS section on how to clean pads.
CLEANING INSTRUCTIONS
1. Spray surface with water by holding unit by handle
and pressing spray trigger (fig. 6). Ensure spray
is directed towards area to be cleaned and cover
surface with water.
2. Turn unit over and hold by the water tank portion
of the unit (fig. 7) to use the cleaning pad to clean
surface. If needed, a mild glass cleaner can be
sprayed on surface.
3. Once surface is clean, turn unit over again and
turn on suction by pressing power button. Keep
unit in a horizontal position and move squeegee
over surface in a gentle, top-to-bottom movement
to remove excess water and dirt. When finished,
turn off suction by pressing power button again.
4. Remove water tank from unit and remove water
collection tank cap and water filter cap (fig. 8).
Empty water collection tank by turning upside-
down over a sink until all water
is gone.
5. Remove squeegee head to remove filter. Clean filter after every use. See CARE
INSTRUCTIONS for how to clean filter.
FIG.6
FIG.8
NOTE: Do not spray into eyes or onto surfaces with electronic components, such as power
plugs, switches, cables, stereo equipment, computer screens, or household appliances.
WARNING: Use suction function only to remove liquids used during cleaning process.