ViaSat ArcLight, User Manual, Page: 79 / 368

ArcLight Hub User’s Guide
Screen Descriptions for NMS Client
Rev. 001 1081006 3-9
3.2.4 Control Buttons
Most screens have control buttons along the bottom edge of the screen.
OK – Click on this button to close the screen.
Apply – Click on this button to apply the entries just made, and store
the new data in memory. The current screen will remain open. A pop-
up error message will be displayed to warn the user if any information,
required for the process being edited, is missing or out of an allowed
range. Clicking OK and Apply will send data to the NMS Server (if
applicable).
Cancel – Click on this button to erase any new entries made on the
open screen, close the current screen and revert to the next higher-level
screen in the hierarchy. The next time the screen is opened the values
that existed before the current editing session will appear. The Cancel
button will not undo use of the OK or Apply buttons.
3.2.5 Window Arrangement and Size Controls
Use the Window pulldown menu (shown in Figure 3-10) to select how
windows will be displayed. The choices are to Tile, cascade in a line,
minimize all windows, or close all windows.
The windows title bar has the standard minimize, expand, and close
boxes on the extreme right side of the title bar that are activated by
clicking on the box icons.
Figure 3-10. Window Pulldown Menu.
Some sub-windows may also have separate sub-window size controls
located on the extreme right side of the sub-window title bar.
To minimize the sub-window, click on the small box icon with the
diagonal arrow pointing down.