manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 76 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 76

 ArcLight Hub User’s Guide

 

Screen Descriptions for NMS Client

 

3-6 1081006 

Rev. 

001

 

 

3.2 GUI 

Navigation 

Once the ArcLight Management Client screen is displayed, several 
alternatives are available for navigation through the GUI screens. These 

techniques are described in the following sections. 

 

3.2.1 Main 

Menu 

Bar 

Use the main menu bar or the shortcut keys shown on the drop-down 
menu items. These drop-down menus are shown in Figure 3-2, and 
Figure 3-5   through Figure 3-8. The Window and Help dropdown 

menus are shown in Figure 3-7 and Figure 3-8. The menu selection 
items with icons correspond to the shortcuts available for direct display 
using the Tool Bar Icons. 

 

 

Figure 3-5.  Session Drop-down Menu. 

 

 

Figure 3-6.  VMTs Drop-down Menu. 

 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments