ViaSat ArcLight, User Manual, Page: 73 / 368

ArcLight Hub User’s Guide
Screen Descriptions for NMS Client
Rev. 001 1081006 3-3
Enter user name and password, and click on the OK button or hit the
<Enter> key.
If an error is made in entering either the user name or password an
error pop-up message will be displayed requesting the information be
reentered.
If login was successful, the ArcLight Management Client screen will
refresh and the network of hubs currently online will be displayed
, as
shown in Figure 3-3.
Figure 3-3. ArcLight Management Client Screen – Three Hubs in Configuration.
The hub map screen view depicts the location of each installed hub in
the network configuration (in this example there are three hubs) and
status of all hub components (in the left column) that are configured as
part of these hubs, including redundant components (i.e.,
Primary/Backup).
These component names can be customized by the users and each is is
preceded by a LED-like icon that indicates it current status (refer to
Table 3-1). Mouse-responsive areas are associated with each icon in
order to allow right-click context menu access to hub component-
specific status and configuration windows. These status overlays and
clickable areas are automatically slaved to their associated icons’ sizes
and screen positions, allowing for such interface enhancements as a