Viante CAF-05T, Instruction Manual

Page: 9 / 14

6
SETTING THE CLOCK AND DELAY BREW TIME
TO SET THE CLOCK:
1. Plug the power cord into a
standard electrical outlet. The
clock will flash on the control
panel to indicate that the time
has not been set.
2. Press and hold the
HOUR
( ) and
MINUTE
( ) buttons until you
reach the current time. The
AM
or
PM
indicator
will light up at the
bottom of the display. The clock
is now set!
Note: Pressing any button before setting the clock will cause the clock
to start keeping time from
12:00 AM
. You must set the clock if you
want to use the Delay Brew feature.
TO SET THE DELAY BREW TIME:
1. While the display is in the clock mode, press the SET Delay Button
( ).
2. While the Delay Brew Time is flashing, set the desired brew time by
pressing the Hour and Minute buttons. The AM or PM indicator will
light up at the bottom of the clock display. Within a few seconds the
display will change to the current time. The Delay Brew ( ) Time is
now set.
3. To check the programmed time, push the SET Delay ( )button. The
display will show the time you have programmed the coffee to brew.
If you press the SET Delay ( ) button again or wait a few seconds,
the display will switch back.
c
a
c
d
d
d
d
e
f
g
g
b
b