6
EN
Ceiling Installation
Saw a hole in the ceiling according to
the dimensions of the extractor hood.
Slide the extractor hood into the
opening.
Ceiling
Brackets
Hood
Push the extractor hood upwards until the brackets engage in the false ceiling. If you
do not engage, use a screwdriver to pierce the four holes in the lower corners of the
hood.
The brackets should be adjusted so
that the lower edge of the extractor
hood is flush with the ceiling. Screw 4
screws through the four holes in the
lower corners of the hood.
Note
: The ventilation pipe must be installed after adjusting the extractor hood.
