9
Operation Instructions
First Time Use
Clean your kettle by boiling a full kettle of water twice and then
discarding the water.
Using the Mains Cable
The mains cable is stored at the bottom of the kettle stand.
1. Unwind the mains cable from the bottom of the kettle stand.
2. Extend the mains cable to the required length.
3. Insert the mains cable in the slot of the
stand. For safety it is recommended that
the length of exposed mains cable is kept
as short as possible.
Slot
WARnInG.
The kettle must only be used with the stand
provided.
Filling the Kettle
1. Grip the handle and press the Open Lid button to open the lid.
2. Fill the kettle with the required amount of water. Do not exceed
the maximum fill level (MAX 1.7L) as indicated on the Water Fill
Level. Always ensure the kettle is filled past the MIN (0.7L) as
indicated on the Water Fill Level.
WARnInG.
•
If the kettle is overfilled, boiling water
may be ejected from the spout and
cause scalding.
•
If water level is too low (below the MIN level), the kettle
will automatically switch off.
V17LKW_R_C_K15_IB_150907_grace.indd 9
7/9/15 2:36 pm
