7
1. Open the transparent lid and take out the ice basket. Pour
potable water into the water reservoir. Put back the ice basket.
Close the transparent lid.
WARNING.
The water poured into the water reservoir should be lower
than the water reservoir’s MAX position.
2. Connect the mains plug. The Power indicator will flash. The unit
is now in standby mode.
3. Press the SELECT button to select the desired ice size. You can
select either small (indicator will light up) or large (indicator will
light up) ice size. The default size is large.
4. Press the POWER button to start. You can press the POWER
button during operation to return the unit to standby mode.
NOTE.
•
For the first three cycles, the ice may be small and irregular in
size. This may be due to warm water or ambient temperature.
Use cool water (15°C-20°C) and operate the unit in an ambient
temperature below 25°C.
•
When the ice basket is full, remove the ice immediately. Do not
allow the ice basket to overfill.
•
When the ADD WATER indicator lights up in red, it means there is
insufficient water in the water reservoir. You need to add enough
water and then press the POWER button to restart.
•
When the ICE FULL indicator flashes, it means the ice basket
has reached the maximum storage capacity. Ice will stop being
produced, the machine will automatically restart when the ice has
been removed.
Operation Instructions
V12IMS15_IB_150910_grace.indd 7
10/9/15 1:55 pm
