-1-
1.1 Package Contents
Digital video recorder (DVR) * 1
HDD bracket screws (spare parts) * 4
Adapter and power cord * 1
DSUB PIN connector * 1
Free licensed software AP disc * 1
IR remote controller * 1
Manual & quick start & IR remote control manual * 1
AAA size battery * 2
1.2 Front Panel
1) LED Indication
The following LEDs will be on when:
/ POWER: power is connected
/ HDD: HDD is reading or recording / HDD Full: HDD is full
/ ALARM: any event alarm is triggered
/ TIME: timer recording is activated
/ PLAY: when the DVR is playback
STANDBY: when the DVR is standby
HDD Full: HDD is full
REC: when the DVR is recording
2)
(USB port)
To quickly backup or upgrade firmware/OSD, you can insert a compatible USB flash drive into this USB port.
Before using the USB flash drive, please use your PC to format the USB flash drive as “FAT32” first.
!" #$ %&'
( )
) *
" +
!",
3) IR receiving zone
If the control panel is removed from the DVR and used as a remote controller, aim the remote controller at this
area to control the DVR operation.
4) Password Entering
Use the number buttons to enter the DVR password. Or use
/
buttons to setup the password.
5) Channel Display Selection
Use the number buttons select the channel. Or press “SHIFT + CH
” and “SHIFT + CH
” buttons to select the
channel.
6) SNAP
When the DVR is not under the menu mode, connect a USB drive to the DVR and then press “SNAP” button to
take a snapshot picture of the current live image on the monitor.
7) LIST (Event List Search)
To quick search the recorded files by event list, press “LIST” button or “SHIFT + LIST” buttons to show all types of
the event lists.
ALARM: List the information of the alarm-trigger-recorded files.
MANUAL: List the information of the manual-recorded files. The DVR will save one recorded file once any recording setting is changed