Tire Inflation Gun
OPERATION INSTRUCTIONS:
This air compressor comes with 1/4” quick connect
stud. An extension coil hose and a tire inflation gun
are also included with your compressor. Each end of
the extension coil hose is equipped with a 1/4” quick
connect coupler. The tire inflation gun comes with a
1/4” quick connect stud, pressure gauge, rubber
hose, bleeder valve and tire chuck. Attach one end of
the extension coil hose to the stud on your
compressor and the other end to the stud on the tire
gun kit. The tire gun kit can be used for both airing
up and airing down. Please familiarize yourself with
the following functions of this versatile air tool:
A. TIRE INFLATION:
1.
Attach one end of the extension coil hose to the
compressor and the other end to the tire gun kit.
2.
Push the tire chuck, with the lever in the upright
position, down over the tire valve stem and then
push the lever down to the horizontal position to
lock in place.
3.
Turn compressor switch on and hold down the
trigger on the tire gun kit to begin inflation.
4.
When desired pressure is reached, release the
trigger and turn power switch on compressor off.
Note: Your air compressor is equipped with a
pressure switch (cut in at 120psi, cut out at 145psi).
This feature is designed to protect the air
compressor from over-pressure causing permanent
damage to your air compressor. The pressure switch
automatically turns off the motor when the internal
pressure of the air compressor reaches the factory
set “cut-out” pressure (145psi) and restarts when the
internal pressure drops below 120psi.
B. TIRE DEFLATION:
1.
Push the tire chuck (with the lever in the upright
position) down over the tire valve stem and then
push the lever down to the horizontal position to
lock in place.
2.
Press the bleeder valve button on the tire gun kit
to decrease tire pressure.
3.
When desired pressure if reached, release the
bleeder valve button to halt deflation.
C. INLINE PRESSURE GAUGE:
1.
The pressure gauge on the inflation gun provides
convenient tire pressure monitoring when airing
up or down (not airflow of the compressor). This
eliminates switching back and forth between a
tire chuck and a tire pressure gauge.
2.
Please note that during inflation and deflation,
due to air velocity, pressure gauge cannot
provide accurate pressure readings. Release
lever on the tire inflation gun during inflation to
check tire air pressure.
NOTE: To release excess pressure, turn off
compressor and disconnect hose from compressor.
With the tire inflation gun still connected to the other
end of the coil hose, pull trigger on the tire inflation
gun to release excess pressure
.
