Page 29 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
In the following command prompt, select the desired, such as the second parameter set:
Parameter set=2
If you look in the submenus
Speed display options
and
Extensions thresholds
you will find
now the values of the 2
nd
parameter Set. In the submenu
Time Schedule
you find the valid
times and days which are defined for the 2
nd
parameter Set.
If you want to know which parameter set is active in the viasis you need to look into the main
menus submenu
Information and Time
.
In the viagraph Settings input window by default only the parameters of parameter set 1 are
shown, see illustration 41. Just after the release in the menu
Tools – Parameter sets - On
, the
access to all parameter sets and the combined time schedule
Scheduling
gets visible, see also
Illustration 42: Parameter sets and time schedule
