Page 21 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
In the viagraph start win-
dow select the menu
Tools
and further
Parameter set
,
see illustration 32. From
the here given list of pa-
rameter files (*.par) select
the viasis with the serial
number, whose settings
you want to modify.
The screen with the viasis
settings is shown then, with
several tabs depending on
the viasis type, see illustration 33.
Here you can make the needed parameter changes offline, see also chapter 6.3 following.
With the buttons
Save
and
USB-Stick
you may save the
parameter settings
for later use on the
computer hard disk
drive or the changed
parameters directly
to the USB stick.
Before you click the
USB Stick
button,
select the correct
USB Stick Drive
letter.
If you plug-in the
USB stick with the
changed parameters
at your viasis, the
parameter file is au-
tomatically read and
the viasis reconfig-
ured.
Only if you selected the parameter file of a viasis PLUS, see illustration 32, appears the check
box
Matrix
in the settings window, see also illustration 33.
Is the option
Matrix
activated you can save text pages and bitmaps (see also chapters 6.10.1
and 6.10.2), which are stored in files on the hard disk, together with the parameter settings in a
single parameter file on the USB stick for a further transfer to a viasis PLUS. With the drop
down selections
Text
and
Bitmap
you can choose the files.
Illustration 32: viasis parameter file selection
Illustration 33: viasis settings
