IP Address
Static, set at 10.x.x.x (where x is a number
between 0 and 254)
Subnet Mask
255.0.0.0
Default Gateway
10.0.0.1
VLANs
Disabled (all ports run as untagged on VLAN
ID #1)
Mgmt VLAN
VLAN ID#1
PoE Supply
External supply value set to zero watts (PoE
effectively disabled)
Port PoE
Enabled. Above value must be set >5W
before a PoE device will boot
QoS
Off
Port Link
Auto-negotiate
DHCP
Disabled
IGMP
Disabled
Art-Net to sACN
Conversion
Disabled
Art-Net Alternate
Mapping
Enabled (only applies when above
feature is enabled)
2100-DIN
eDIN RJ45 patch (lot of 4) (3.5” of rail for 4)
1001-100-48-DIN
100 Watt, 48VDC Power Supply,
DIN-mountable
Model 6716 VIA16 Ethernet Switch
Installation
Guide
6716-300-REV1
05/29/18
Pathway Connectivity Solutions
#103—1439 17Avenue SE Calgary AB
Canada T2G 1J9
www.pathwayconnect.com
tel (403) 243-8110 fax (403) 287-1281
APPLICATION EXAMPLE
DEFAULT SETTINGS
•
Power input:
•
Switch Only: 20-50 VDC, 10 watts maximum
•
Full PoE Support: 48-50VDC, 190 watts maximum
(180 watts for 12 PoE devices)
•
PoE Ports: Class 3, 15.4 watts maximum per port, x12
ELECTRICAL INFORMATION
ACCESSORIES
REV
.0 1321
eDIN 4-POR
T DMX/RDM GA
TEW
AY
Pathway Connectivity
www.pathwayconnect.com
POWER IN
V+
V-
GRD
V-
V+
18-48VDC
6 W
atts MAX
PORT A
D1-
SHLD COM
D1+
D2-
D2+
D1-
SHLD COM
D1+
D2-
D2+
D1-
SHLD COM
D1+
D2-
D2+
D1-
SHLD COM
D1+
D2-
D2+
PORT B
PORT C
PORT D
SD CARD OK
PROCESSOR
ISO PWR D
ISO PWR A
ISO PWR B
ISO PWR C
OUTPUT D
OUTPUT A
OUTPUT B
OUTPUT C
INPUT D
INPUT A
INPUT B
INPUT C
MICRO-SD
IDENTIFY
ETH LINK
ACTIVITY
ETHERNET
802.3AF PoE
1107 eDIN enclosure
Intelligent Fixtures
Pathway Modular Receptacle
(EtherCon)
Console
Choreo Architectural Controller
NSB - 2-Button Master, (2) 4-Button
Local
NSB - 2-Button Master (2) 2-Fader Local,
(1) 1-Fader Local
NSB - 4-Button
Master
NSB - 2-Button Master, (2) 2-Fader Local,
(1) 1-Fader Local
LED Wash Lights
48VDC 100W
Power Supply
6716 VIA16
2100-DIN
eDIN Patch
Building Cat5
Cat5
Patch
Cables
1014-TRM Pathport
Gateway
