3
VIA IVT01 Android 10.0 EVK Quick Start Guide
2.
Image Installation
This section explains the setup requirements for booting from the eMMC.
The precompiled images are provided in the "Firmware" folder.
2.1
Installing with the Fastboot Mode
The first step is to prepare the "fastboot tool" and install the "VIA USB driver" into your Windows 10 host
machine.
To get the "fastboot tool" for Windows, please refer to the "SDK Platform Tools release notes" chapter on the
Android developer website (https://developer.android.com/studio/releases/platform-tools).
To install the "VIA USB driver", right-click on the mouse button to install the "android_winusb". When finished,
it will show "The operation completed successfully".
Then connect the Windows 10 host machine and the VIA IVT01 through the USB 2.0 Type-A port using the
Male USB Type-A to Male USB Type-A cable.
USB 2.0 Type-A port diagram
Plug in the AC-to-DC power adapter to power on the VIA IVT01.
The VIA IVT01 will stop at "fastboot: processing commands" as shown in the debug console below.
Fastboot Mode
Note:
Make sure the Windows 10 host machine detects the VIA IVT01 as an Android device.
