manualshive.com logo in svg

VIA Technologies EPIA-PE, User Manual, Page: 59 / 85

Share
Download
VIA Technologies EPIA-PE User Manual Download Page 59

  

BIOS 

Setup 

 49 

Frame Buffer Size 

This setting instructs the BIOS to reserve the specified amount of memory 
for the internal video controller.  

Settings: [16M, 32M, 64M] 

AC97 Audio 

Auto allows the mainboard to detect whether an audio device is used. If the 
device is detected, the onboard VIA AC'97 (Audio Codec'97) controller will 
be enabled; if not, it is disabled. Disable the controller if you want to use 
other controller cards to connect to an audio device.  

Settings: [Auto, Disabled] 

VIA OnChip LAN 

This setting allows you to make VIA OnChip LAN enabled or disabled.  

Settings: [Enabled, Disabled] 

USB Keyboard Support 

Enable USB Keyboard Support for DOS and Windows.  

Settings: [Enabled, Disabled] 

VIA Onboard LAN 

Enables the onboard LAN controller.  

Settings: [Enabled, Disabled] 

Onboard Lan Boot ROM 

Enable Onboard Lan Boot ROM for DOS and Windows.  

Settings: [Enabled, Disabled] 

Summary of Contents for EPIA-PE






















































































Reviews:

No comments