manualshive.com logo in svg

VIA Technologies EPIA-M910, User Manual, Page: 73 / 107

Share
Download
VIA Technologies EPIA-M910 User Manual Download Page 73

VIA EPIA-M910 User Manual 

62

 

6.6.8.

 

USB Configuration 

The USB Configuration screen shows the number of connected USB devices.  
 

 

Figure 60: Illustration of USB Configuration screen 

6.6.8.1.

 

Legacy USB Support 

The Legacy USB Support feature enables environments that do not have native USB support to use USB 
devices. This feature has three options. 

Auto 
The Auto option automatically disables legacy support if no USB devices are connected. 

Enabled 
The Enabled option keeps the Legacy USB Support feature on at all times. 

Disabled

 

The Disabled option keeps the Legacy USB Support feature off at all times.

 

6.6.8.2.

 

USB 2.0 Controller Mode 

The USB 2.0 Controller Mode feature enables the user to set the USB 2.0 controller in HiSpeed (480Mbps) 
or FullSpeed (12Mbps) mode. 

FullSpeed 
The FullSpeed option limits the USB 2.0 controller to transfer data at 12Mbps. 

HiSpeed

 

The HiSpeed option enables the USB 2.0 controller to transfer data at 480Mbps. The connected USB 
device must support USB 2.0 HiSpeed in order to benefit from this setting.

 

 

Summary of Contents for EPIA-M910












































































































Reviews:

No comments