VIA Technologies EPIA-LT, User Manual

Page: 50 / 70

Chapter 3
42
Suspend Time Out
Settings: [Disabled, 1/2/4/8/10/20/30/40 minutes]
Hard Disk Time Out
Settings: [Disabled, 1/2/3/4/5/6/7/8 minutes]
Green PC Monitor Power State
Settings: [Standby, Suspend, Off]
Video Power Down Mode
Settings: [Disabled, Standby, Suspend]
Hard Disk Power Down Mode
Settings: [Disabled, Standby, Suspend]
Display Activity
Settings: [Ignore, Monitor]
Monitor IRQ3~15
Enables or disables the monitoring of the specified IRQ line.
Settings: [Ignore, Monitor]
Note:
IRQ (Interrupt Request) lines are system resources allocated to I/O
devices. When an I/O device needs to gain attention of the operating
system, it signals this by causing an IRQ to occur. After receiving the
signal, when the operating system is ready, the system will interrupt itself
and perform the service required by the IO device.
Resume on PCI
Settings: [Disabled, Enabled]
Resume on KBC
Settings: [Disabled, S3, S3/S4/S5]
Wake-up Key
Settings: [Any Key, Specific Key]