VIA Technologies EITX-3001, User Manual, Page: 66 / 96

57
Restore on AC / Power Loss
The field defines how the system will respond after an AC power
loss during system operation.
Settings Description
Power Off Keeps the system in an off state until the power button is
pressed.
Power On Restarts the system when the power is back
Last State Save in last state
System Thermal
Settings Description
Enabled Enables the user the manually specify the Thermal Active
Temperature and THRM Throttle Ratio settings.
Disabled Disables the manually settings of Thermal Active Temperature
and THRM Throttle Ratio settings.
Standby Time Out
Settings Description
Disabled Support for this feature will be unavailable.
1 – 8 min,
10 – 60 min Enables the user to manually specify the length of time of
inactivity before the BIOS puts the system into standby
mode.
Increments in multiples of 2 from 1 to 8 minutes.
Increments of 10 from 10 to 60 minutes.
Suspend Time Out
Settings Description
Disabled Support for this feature will be unavailable.
1 – 8 min,
10 – 60 min Enables the user to manually specify the length of time of
inactivity before the BIOS puts the system into suspend
mode.
Increments in multiples of 2 from 1 to 8 minutes.
Increments of 10 from 10 to 60 minutes.
Hard Disk Time Out (Minute)
Settings Description
Disabled Support for this feature will be unavailable.
1 – 15 min Enables the user to manually specify the length of time of
hard disk inactivity before the BIOS stops spinning the
hard drive.
Increments of 1.