manualshive.com logo in svg

VIA Technologies EITX-3000, User Manual

Share
Download
VIA Technologies EITX-3000 User Manual Download Page 102

 

 

92

S

ELECTION OF 

E

M

-IO

 EXPANSION 

MODULES

 

Faster Time to Market Cycles 

VIA has also designed a selection of expansion modules covering 

a variety of industrial applications including multimedia display, 

automation control, kiosk, POI and POS applications. The 

expansion modules bring all the advantages of off-the-shelf 

features without the necessary development time. VIA also 

provides unrivalled software support including customized 

firmware implementations. 

EMIO-3110 

Multi Display Em-IO Card with 2 HDMI, 2 DVI, VGA, 
TV-Out, Audio 

The EMIO-3110 is designed with the S3 Graphics 4300E 

embedded GPU plus a 256MB GDDR3 SDRAM display memory, 

to deliver the best-in-class performance, unrivalled efficiency, and 

powerful graphics ability. It supports the latest Microsoft

®

 DirectX™ 

10.1 and OpenGL 2.1 graphics architectures for smooth, realistic 

3D gaming, jaw dropping Hi-Definition video playback and the 

latest display connectivity including two HDMI, two DVI, and one 

CRT/VGA. It also provides Line-in, Line-out, and Mic-in audio 

options. The dimension of EMIO-3110 is 20.4 cm (W) x 12 cm (L). 

 

 

 

Summary of Contents for EITX-3000








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands