Copyright
Copyright © 2022 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of
VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respective holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no warranties,
implied or otherwise, in regard to this document and to the products described in this document. The information provided in this
document is believed to be accurate and reliable as of the publication date of this document. However, VIA Technologies assumes no
responsibility for the use or misuse of the information (including use or connection of extra device/equipment/add-on card) in this
document and for any patent infringements that may arise from the use of this document. The information and product specifications
within this document are subject to change at any time, without notice and without obligation to notify any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior notice.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his personal expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Notice 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conflicts or
damages arising from incompatibility of the product. Check compatibility issue with your local sales representatives before placing an
order.
ii