ARTiGO A820 Linux BSP v3.2.1 Quick Start Guide
12
5.2.
Configuring Network Settings
The ARTiGO A820 supports two LAN ports and the default setting is Gateway mode. In
Gateway mode, LAN 1 is a WAN port while LAN 2 is a LAN port. If the system is
already connected to the Wi-Fi module, it won’t support WLAN.
LAN 1 and LAN 2 diagram
Open a terminal and configure the network setting with the following command:
$ /etc/networkcfg
To disable the Gateway mode and to use the WLAN, select item 7 “Enable and Disable
Gateway”, and then select item 6 “Reboot” as illustrated by the screenshot below.
1) Ethernet 5) Exit
2) WLAN Config 6) Reboot
3) Reset 7) Enable or Disable Gateway
4) Show Information
Enter option: 7
Please reboot
1) Ethernet
2) WLAN Config
3) Reset
4) Show Information
5) Exit
6) Reboot
7) Enable or Disable Gateway
Enter option: 6
Reboot selected
Network configuration
When the boot process is completed, click on the “Connection Manager” icon to
configure LAN 1, LAN 2 and WLAN respectively.
Connection Manager icon diagram
HDMI
LAN 2
LAN 1
USB
5V DC-IN
(Gigabit Ethernet)
LAN 1
(10/100Mbps Ethernet)
LAN 2
