VIA Technologies ARTiGO-A1250, User Manual

Page: 22 / 65

ARTiGO ARTiGO ARTiGO ARTiGO- -- -A1250 A1250 A1250 A1250 User Manual User Manual User Manual User Manual
13
2.2.2. LAN Port: Gigabit Ethernet
The ARTiGO-A1250 system is equipped with one Gigabit Ethernet port (LAN1)
on rear panel. The port is fully compliant with IEEE 802.3 (10BASE-T), 802.3u
(100BASE-TX), and 802.3ab (1000BASE-T) standards. The pinout of the LAN1
port is shown below
Figure Figure Figure Figure 10 10 10 10: Gigabit Ethernet port pinout diagram : Gigabit Ethernet port pinout diagram : Gigabit Ethernet port pinout diagram : Gigabit Ethernet port pinout diagram
LAN1 LAN1 LAN1 LAN1
Pin Pin Pin Pin Signal Signal Signal Signal
1 L
2 LAN1_TD0-
3 L
4 LAN1_TD1-
5 L
6 LAN1_TD2-
7 L
8 LAN1_TD3-
Table Table Table Table 4 4 4 4: Gigabit Ethernet port pinout : Gigabit Ethernet port pinout : Gigabit Ethernet port pinout : Gigabit Ethernet port pinout
The LAN port (RJ-45) has two individual LED indicators located on the front
side to show its Active/Link status and Speed status.
Link LED
Link LED Link LED
Link LED
(Left LED on RJ (Left LED on RJ (Left LED on RJ (Left LED on RJ----45 connector) 45 connector) 45 connector) 45 connector)
Active LED
Active LED Active LED
Active LED
(Right LED on RJ (Right LED on RJ (Right LED on RJ (Right LED on RJ----45 connector) 45 connector) 45 connector) 45 connector)
Link Off Off Off
Speed_10Mbit The LED is always On in either Green
or Orange colors
Flash in Yellow color
Speed_100Mbit The LED is always On in Green color Flash in Yellow color
Speed_1000Mbit The LED is always On in Orange color Flash in Yellow color
Table Table Table Table 5 5 5 5: Gigabit Ethernet LED color de : Gigabit Ethernet LED color de : Gigabit Ethernet LED color de : Gigabit Ethernet LED color definition finition finition finition