13
VIA VAB-950 User Manual
3.4
Battery Charger Connector
The VIA VAB-950 is equipped with a battery charger connector labeled as ‘BAT1’ which is used for charging the
rechargeable lithium battery. The pinouts of the battery charger connector are shown below.
Figure 20:
Battery charger connector diagram
Table 10:
Battery charger connector pinouts
3.5 DC-in Connector
The VIA VAB-950 comes with a DC-in connector that carries a 12V DC which provides power to the board. The
DC-in connector is labeled as ‘J3’. The pinouts of the DC-in connector are shown below.
Figure 21: DC-in connector diagram
Table 11: DC-in connector pinouts
Pin
Signal
1
BAT+
2
BAT+
3
I2C_CLK
4
I2C_DATA
5
TH
6
BAT-
7
BAT-
Pin
Signal
1
12VIN
2
GND
