VIA Mainboard epia-n700, User Manual

Page: 45 / 76

EPIA-N700 User’s Manual
37
37 37
37
Quick Power On Self-Test
Shortens Power On Self-Test (POST) cycle to enable shorter boot up time.
Settings Settings Settings Settings Description Description Description Description
Disabled Standard Power On Self Test (POST)
Enabled Shorten Power On Self Test (POST) cycle and boot up time
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk operating
system.
Settings Settings Settings Settings Description Description Description Description
LS120 Boot from LS-120 drive
Hard Disk Boot from the HDD
CDROM Boot from CDROM
ZIP100 Boot from ATAPI ZIP drive
USB-FDD Boot from USB Floppy drive
USB-ZIP Boot from USB ZIP drive
USB-CDROM Boot from USB CDROM
Legacy LAN Boot from network drive
Disabled Disable the boot device sequence
Boot Other Device
Enables the system to boot from alternate devices if the system fails to
boot from the “First/Second/Third Boot Device” lists.
Settings Settings Settings Settings Description Description Description Description
Disabled No alternate boot device allowed
Enabled Enable alternate boot device
Boot Up NumLock Status
Set the NumLock status when the system is powered on.
Settin Settin Settin Settings gs gs gs Description Description Description Description
Off Forces keypad to behave as arrow keys
On Forces keypad to behave as 10-key
Typematic Rate Setting
Enables “Typematic Rate” and “Typematic Delay” functions.
Settings: [Disabled, Enabled]