VIA Mainboard ARTiGO-A1150 User Manual Download

Page: 6 / 68

ABLE OF

ONTENTS

1 Product Overview............................................................................................... 1

Key Features........................................................................................................... 2

Specifications ......................................................................................................... 4

ARTiGO-A1150 Dimensions........................................................................... 7

2 Front, Rear and Side I/O Pin Descriptions and Functionality........ 9

Front I/O Layout ................................................................................................10

Rear I/O Layout ..................................................................................................10

Side I/O Layout...................................................................................................10

I/O Pin Description ...........................................................................................11

Power Button.................................................................................................11

LED Indicators (Power LED and HDD LED)...................................11

USB device port.............................................................................................11

USB 2.0 ports..................................................................................................11

Audio Ports (Line-out, Line-in and Mic-in)........................................12

VGA Port ..........................................................................................................12

HDMI

Port......................................................................................................13

LAN Port ...........................................................................................................13

Power Input (DC-In) Port..........................................................................13

3 Basic installation .................................................................................................15

Installing the memory .....................................................................................16

Opening the Top Cover Chassis................................................................18

Installing the SATA 2.5” Hard Disk ............................................................19

Installing the SD Card Reader .....................................................................23

Installing the WLAN kit ...................................................................................27

Installing VESA Mount Bracket ...................................................................31

4 BIOS Setup............................................................................................................33

Entering the BIOS Setup Menu ..................................................................34

Control Keys .........................................................................................................34

Getting Help ........................................................................................................35

System Overview ...............................................................................................36

AMIBIOS............................................................................................................36

Processor ..........................................................................................................36

System Memory.............................................................................................36

System Time ....................................................................................................36

System Date ....................................................................................................37

Advanced Settings ............................................................................................38

CPU Configuration ...........................................................................................39

Summary of Contents for ARTiGO-A1150





































































Search results

Summary of Contents for ARTiGO-A1150

Reviews:

Related manuals for ARTiGO-A1150

Brands by name

Popular brands

VIA Mainboard ARTiGO-A1150, User Manual

Search results

Summary of Contents for ARTiGO-A1150

Reviews:

Related manuals for ARTiGO-A1150

Brands by name

Popular brands