DELIVERANCE D120H FUNCTIONS
REAR PANEL, RIGHT TO LEFT
1. SPEAKER
OUTPUT – Parallel wired jacks. Impedance switch setting should equal total of all cabinet
impedances plugged into both jacks. “Use First” jack must be plugged in for output to operate.
2. IMPEDENCE
SELECT - 4,8 or 16 ohms. Example: Two 8 Ohm cabs = 4 Ohms, two 16 Ohm cabs = 8
Ohms.
3. GROUND
SWITCH – Select position which yields quietest operation. With a properly wired AC outlet and
factory supplied AC cord, this switch will not produce a noticeable difference.
4.
AC MAINS INPUT – Use only the factory supplied AC cordset or a UL approved equivalent type.
