Vexve AM40, Instructions & User'S Manual, Page: 12 / 156

Adding a Wireless Room Unit
Wireless Room Unit for the AM40 ECU:
product nr. 1140041: Pack A, Wireless
room Unit & Transmitter
Mechanical assembly:
Connect RF-antenna unit to RF-connector
in ECU, place antenna as high as possible.
Antenna can be extended for better RF-
reception with ready coupled wire.
(10 meter extension cord Vexve nro.
1920096)
Remove the protective plastic from the
batteries in Room Unit and check that “RU”
appears on the screen
After mechanical assembly press button 1
two times to reach the Main menu.
Main menu >> go to Device settings >>
go to Communication menu using
up&down buttons (5)
In Communication menu >> go to RF-
devices where You find RF-devices section
Room unit must be powered and word RU
must be on the screen!
(If there is something else on the screen You
must press the commissioning button D on
the room unit with tip of a pen. Select DE
fa
from the commissioning menu and select
Yes for that.
10 11 www.vexve.fi.