Vexus Audio 952.010, Instruction Manual

Page: 3 / 13

3
HOW TO USE
1. Speaker
2. Clips for carry strap
3. Press-to-talk switch: Press this switch
for announcing when holding the
megaphone.
4. Handle grip
5. Battery compartment unlock
6. Sirene switch/ talk switch
7. Battery compartment
8. Power On/Off
9. Microphone
10. Volume controller: To increase volume,
turn clockwise.
11. Microphone fixing hanger
12. Record button.
13. Speech button
14. Play button
15. Power LED indicator
16. Record LED indicator: Light turns on when the device is in
record mode.
OPERATIONAL INSTRUCTIONS
1. Installing the batteries: Press the battery unlock button to open the top cover.
Put 8 pcs size C-batteries properly (+/- terminals must match) into the battery
compartment and close the top cover and the latch.
2. Position the horn opening towards the audience, and speak through the
microphone. Bring the microphone close to your lips and speak normally.
3. Adjust the volume level to optimum without causing howling. Please note that
the closer the sound source is to the microphone the better the amplification
is.
4. Switch the alarm switch to the alarm position, it will generate a continuous
alarm.
5. If the megaphone is activated and the volume of the speaker is weak, the batteries might be empty.
Follow step 1 to replace the batteries.
BASIC TROUBLESHOOTING

If the megaphone does not work, remove the batteries to check if the +/- terminals match correctly.

If the terminal match correctly, place back the batteries and press them down into the battery
compartment firmly, make sure the batteries are in contact properly
TECHNICAL SPECIFICATION
Power max. : 50Watt
Range : outdoor up to 700-1000m
Battery : 8pcs Type C-Battery
Battery lifetime : permanent use up to 5 hours
Dimensions : Horn Ø230mm, Length 340mm
Weight (without battery) : 1.65Kg
The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.