STEREO CASSETTE PLAYER
VX3038
OPERATING INSTRUCTIONS
1. PHONES jack
2. VOLUME control
3. DC IN 3V jack
6. F.FWD buttons:
4. PLAY button:
5. STOP button:
CONTROLS
distortion.
Replace the batteries if you hear
NOTE:
(not included with this unit)
Batteries: 2 x " AA" batteries (UM-3/R6)
POWER SUPPLY
damage your unit.
Note the following precautions:
Be sure that the plus (+) and
minus (-) poles are facing in the
correct directions.
Do not mix battery types.
Do not mix new batteries with old
ones.
Never leave dead batteries in the
battery compartment.
Remove batteries when not using
the unit for extended periods.
Never try to recharge the batteries
that are specified for the power
supply of this unit.
Do not expose batteries to direct
them to leak or burst, and may
Incorrectly using batteries can cause
PRECAUTIONS
be seriously affected!
normal hearing ability may otherwise
when using headphones! Your
Avoid continuous high volume setting
IMPORTANT
direct contact with your skin.)
letting the battery fluid come into
immediately, taking care to avoid
compartment of the unit
leaks, clean out the battery
try to take them apart.(If a battery
heat, let them become shorted or
2
3
4
button.
7.To stop the tape, press the STOP
comfortable listening level.
6.Adjust the VOLUME control to your
5.Press the PLAY button.
so that the open edge faces up.
into the cassette compartment
4.Insert a pre-recorded cassette tape
3.Open the cassette compartment.
lowest position.
2.Adjust the VOLUME control to the
PHONES jack.
1.Plug the headphones to the
PLAYBACK
CASSETTE TAPE OPERATION
SUBJECT TO MODIFICATION WITHOUT NOTICE!
FOR ADDITIONAL SET UP OR OPERATING
A S S I S T A N C E , P L E A S E C O N T A C T
CUSTOMER SERVICE AT (954) 660-7100
PLEASE KEEP ALL PACKAGING MATERIAL
FOR AT LEAST 90 DAYS IN CASE YOU
NEED TO RETURN THIS PRODUCT TO
PLACE OR PURCHASE. FOR PARTS AND
A C C E S S O R I E S , C O N T A C T F O X
I N T E R N A T I O N A L A T 1 - 8 0 0 - 3 2 1 - 6 9 9 3
5
7
6
button.
been reached push the STOP
2.When the desired location has
F.FWD button.
1.To fast wind a tape, push the
FAST FORWARD
DC: 3V, 2 x AA (R6P) batteries
SPECIFICATION
AC: with AC adapter (1.3 plug,
center pin negative, DC 3V)
Frequency
response: 60-10,000 Hz(Normal tape)
Dimensions: 111 x 84 x 31 (WHD)
Weight: 136g (with out batteries)
SIZE:74x105mm
