background image

STEREO CASSETTE PLAYER

VX3038

OPERATING INSTRUCTIONS

1. PHONES jack
2. VOLUME control
3. DC IN 3V jack

6. F.FWD buttons:

4. PLAY button:
5. STOP button:

CONTROLS

distortion.

Replace the batteries if you hear 

 

 

NOTE:

(not included with this unit)

Batteries: 2 x " AA"  batteries (UM-3/R6) 

 POWER SUPPLY

 

damage your unit.
Note the following precautions:
    Be sure that the plus (+) and 
    minus (-) poles are facing in  the 
    correct directions.   
    Do not mix battery types.
    Do not mix new batteries with old 
    ones.
    Never leave dead batteries in the 
    battery compartment.
    Remove batteries when not using 
    the unit for extended periods.             
    Never try to recharge the batteries 
    that are specified for the power 
    supply of this unit.
    Do not expose batteries to direct 

them to leak or burst, and may 

Incorrectly using batteries can cause 

 PRECAUTIONS

     be seriously affected!   

     normal hearing ability may otherwise 

     when using headphones! Your 

    Avoid continuous high volume setting 

      

IMPORTANT

     direct contact with your skin.)

     letting the battery fluid come into 

     immediately, taking care to avoid      

     compartment of the unit 

     leaks, clean out the battery 

     try to take them apart.(If a battery 

     heat, let them become shorted or

2

3

4

   button.

7.To stop the tape, press the STOP 

   comfortable listening level.

6.Adjust the VOLUME control to your 

5.Press the PLAY button.

   so that the open edge faces up.

   into the cassette compartment

4.Insert a pre-recorded cassette tape 

3.Open the cassette compartment.

   lowest position.

2.Adjust the VOLUME control to the 

   PHONES jack.

1.Plug the headphones to the 

PLAYBACK

CASSETTE TAPE OPERATION

  

SUBJECT TO MODIFICATION WITHOUT NOTICE!

FOR ADDITIONAL SET UP OR OPERATING 
A S S I S T A N C E ,   P L E A S E  C O N T A C T
CUSTOMER SERVICE AT (954) 660-7100
PLEASE KEEP ALL PACKAGING MATERIAL 
FOR AT LEAST 90 DAYS IN CASE YOU 
NEED TO RETURN THIS PRODUCT TO 
PLACE OR PURCHASE. FOR PARTS AND
A C C E S S O R I E S ,   C O N T A C T  F O X
I N T E R N A T I O N A L  A T  1 - 8 0 0 - 3 2 1 - 6 9 9 3

5

7

6

   button.

   been reached push the STOP  

2.When the desired location has 

   F.FWD button.

1.To fast wind a tape, push the 

 FAST FORWARD

  

DC:                3V,  2 x AA (R6P) batteries

 

SPECIFICATION

AC:                with AC adapter (1.3    plug, 
                      center pin negative, DC 3V)
Frequency 
response:      60-10,000 Hz(Normal tape)
Dimensions:  111 x  84 x 31 (WHD)
Weight:          136g (with out batteries)

SIZE:74x105mm

Reviews: