OPERATING INSTRUCTIONS
TV OPERATION
1.
POWER SWITCH (1)
SLIDE THE POWER SWITCH TO THE “TV”POSITION.
2. BAND SELECTOR (2)
SLIDE THE BAND SELECTOR TO A DESIRED BAND SUCH AS:
VL=TO SELECT THE VHF LOW CHANNELS TV BROADCAST STATION.(EXCEPT 1 SYSTEM)
VH=TO SELECT THE VHF HIGH CHANNELS TV BROADCAST STATION. (EXCEPT 1 SYSTEM)
UHF=TO SELECT THE UHF ALL CHANNELS TV BROADCAST STATION.
3. VOLUME CONTROL. (3)
ADJUST THE KNOB FOR DESIRED VOLUME LEVEL.
4. TUNING CONTROL. (6)
TUNE A DESIRED TV BROADCAST STATION BY TUNING THE TUNING CONTROL.
5. BRIGHTNESS CONTROL (15) & CONTRAST CONTROL (16).
IF THE PICTURE IS TOO BRIGHT OR TOO DARK, ADJUST THE BRIGHTNESS
AND CONTRAST CONTROLS (LOCATED ON THE REAR OF THE UNIT) TO SUIT.
6. VERTICAL HOLD CONTROL (14).
IF PICTURE ROLLS UP AND DOWN,ADJUST THE VERTICAL HOLD CONTOL ON THE REAR
OF THE UNIT.
PRIVATE LISTENING
A EARPHONE JACK (4) IS PROVIDED FOR YOUR PRIVATE LISTENING ENJOYMENT.WHEN THE
EARPHONE PLUG IS INSERTED INTO THE JACK THE INTERNAL SPEAKER IS AUTOMATICALLY
DISCONNECTED.
NOTE:THE JACK IS DESIGNED TO PERMIT THE USE OF 3.5
Φ
PLUG MONO EARPHONE ONLY.
RADIO OPERATION
1.SLIDE THE POWER SWITCH(1)TO THE “RADIO”POSITION.
2.SLIDE THE BAND SELECTOR(2)TO A DESIRED BAND.
3.TUNE A DESIRED RADIO BROADCAST STATION BY TUNING THE TUNING CONTROL(6
)
4.ADJUST THE VOLUME CONTROL (3)TO A DESIRED LEVEL.
5.SLIDE THE POWER SWITCH (1)TO THE“OFF”POSITION TO TURN RADIO OFF.
Summary of Contents for Vextra VX2
Page 10: ......
