102106A-1 9
seconds, it will switch itself into a low power mode.
Battery save does not affect the radio is ability to
receive transmissions, When a signal is detected, it
automatically returns to full power.
2. Remove the batteries if the unit will not be used for a
long period of time.
Installation Belt Clip
1. Slide the belt chip into place into the belt chip slot as
shown on figure 3.
2.
Ensure you hear a click, to indicate that it is securely in
place.
Removing Belt Clip
1.
Pull the belt clip latch away from the unit. as shown on
figure 4.
2. While pulling the belt clip latch, push up on the belt
clip to remove it from the unit.
Belt Clip Latch
Belt Clip
Belt Clip Slot
(Figure 3)
(Figure 4)
Summary of Contents for 99152
Page 13: ...102106A 1 13 99152 102106A 1 ...
