www.desatech.com
113470-01D
9
ACCESSORy
INSTALLATION
Continued
5. Insert brick panel, beveled edge first,
through firebox opening. Tilt and angle top
edge into brick retainer until beveled edge
contacts imager and panel is flat against
firebox (see Figure 17).
6. Align hearth pan bracket over holes near
lower edge of brick panel and secure with
pan screws provided.
7. Replace refractory bracket using screws
removed in step 4, page 8.
8. Repeat steps 5 through 7 for opposite
panel assembly.
9. Replace each screen assembly by po-
sitioning screen rod into locating holes
under top edge of firebox and securing
with Phillips screws removed in step
, page 8.
Note
: Rods may have to be
angled into locating holes at the top of
each screen pocket. Once inserted, pull
free end of rod forward until it lines up
over farthest mounting hole respectively
so rods overlap.
10. Replace log bed over hearth opening
and center between grate and viewing
screen.
11. Replace glass doors if removed. See
Optional Glass Doors,
page 7.
Figure 16 - Removing Refractory Bracket
and Hearth Pan Bracket
Face Panel
(Model CE36M
Only)
Hearth Pan Bracket
(Model CE36M Only)
Refractory
Bracket
Figure 17 - Installing Brick Panels and
Brackets
Refractory
Retainer
Bracket
Hearth Pan
Bracket
Refractory
Bracket
