VEVOR VVPS115BUS User Manual Download Page 4

03

The following information is very important for safety in 

handling this product. Be sure to observe it.

Indicates an imminently hazardous situation that, if not avoided, will result 

in death or serious injury.

DANGER

Indicates a potentially hazardous situation that, if not avoided, could 

result in death or serious injury.

WARNING

Indicates a potentially hazardous situation that, if not avoided, may 

result in minor or moderate injury, or property damage.

CAUTION

ALERT

PROHIBITED

IMPORTANT

   

Do not operate the pool and spa circulation system if a system component is not assembled 
properly, damaged, or missing.

Before starting the system pump, all system valves must be set to allow system water to 

return to the pool.

Remove pressure test plugs and/or plugs used in winterization of the pool/spa from the 

suction outlets. Fail to do so will result in an increased potential for suction entrapment.

Connect only to a branch circuit protected by a ground-fault circuit interrupter (GFCI).

Before working on any electrical equipment, turn off the power supply to the equipment.

Do not permit children to play with this product.

WARNING

Strainer cover must be properly secured to prevent violent separation due to pressure in 
the circulation system.

Before servicing, turn all the circulation system and pump controls off, make sure the filter 

manual air relief valve is in the open position, and all pressure is relieved.

It is highly recommended that this product be installed and serviced by a qualified pool 

professional.

Stay off the main drain and away from all suction outlets.

DANGER

Summary of Contents for VVPS115BUS











Reviews: